GT230 HiSpeed-Corer Your greensmower is turned into a special coring machine, which removes your thatch in another way. ​ The Maredo GT230 HiSpeed-Corer for Removing the Thatch fits your triplex greensmower and turns it into a very special coring machine, which removes your thatch in another way. ​ For years we removed thatch with a verticutter. A verticutter is basically a rotary mower on the side. And did you know that the tip speed of a greensmower verticutter is about 4-5 x less than a regular rotary mower? Any idea how the thatch is cut? There is no cutting, we just pull the thatch out. And that hurts the turf. We see that next day. Look at the brown edges alongside the verticut slits. It takes time for the grass to recover. During this period, the grass is very vulnerable and needs more water, fertilizer, otherwise it may get sick. It simply isn’t the right way to remover thatch. ​ That is the bad part. The good part is that there is a new, much better way to remove your thatch. USE THE MAREDO GT230 HISPEED-CORER for Removing the Thatch. It pulls out the thatch with small hollow tines, that make a real cut. You don’t see a brown edge next day along the hole edge. Even better, the holes are gone in 2-3 days (while the verticut slits stay there for 2-3 weeks). It goes as fast as mowing. 4 million holes per hour are punched with your triplex greensmower up to 25 mm./ 1” deep. Deeper than what can be achieved with a verticutter on a triplex. And because it is fast, quick healing and not hurting your turf, you can do it every 4-5 weeks. And the holes are great for your dusting, fertilizer and irrigation water too. ​ It comes standard with 11 mm =0.430” outside diameter hollow tines. Cross, needle, solid and smaller hollows are available as an option too. An indispensable tool for everybody that wants to maintain his greens in a more sustainable way! WATCH VIDEO GALLERY For more information about products, accessories or prices, please contact us.

vacuum SWEEPER SG400 The TRILO SG400 is a unique vacuum sweeper because it is available with a 3-piece, flexible verticutting shaft. This makes this sweeper very suitable for sloping areas, such as golf courses and verges. The large, air filled Tyres provide low soil pressure and the 1.5 or 1.7m wide suction hood follows the contours of the soil perfectly because of the castor wheels, placed in line with the heart of the shaft. A Walterscheid PTO shaft with wide angle and overrun clutch drive the powerful Ø 850mm, 5 blade fan. The lining of the housing can be replaced for extra-long life. With the optional 5m long wander hose you can easily clean in hard to reach areas. The SG400 can be used with tractors from 35 HP (25 kW). ​ For more information about products, accessories or prices, please contact us. GALLERY WATCH VIDEOS

GT190 Fraze-Groomer The Maredo GT190 Fraze-Groomer, pulls out the POA plant, using a very special technology. ​ Around the main drive shaft, special thin cutting blades are mounted, not square, but at an slight angle. The main shaft is driven via a gearbox, that turns the rotation in the opposite direction and that reduces the revs. As a result, each individual blade tip cuts a short slit by its own. ​ The next blade tip on the row cuts a slit just aside the previous one. So over the full width of the machine we have many short slits (side to side distance 3,8 mm = 0.150”), created by the individual tips of the counter rotating blades. If a shallow rooted weed or POA was sitting in that area, it would have been pulled out. It is like using a fine rake. The operation thins your turf in a random way, pulling out the material that is not well established yet. The working depth can be set at something like 2-6 mm = 0.08 – 0.24”. It is advisable not to go deeper, because if we go deeper we may get too much damage. The cutting blade thickness is 0.8 mm = 0.03”. A stainless steel collecting box is standard incorporated. The GT190 Fraze-Groomer is also an ideal tool to thin and brush up dense turf. It works like a groomer, but much more intensive. Normally you can work at mowing speed. The slower you go, the more intensive the meshed pattern. See the video below and find out how it works. GALLERY WATCH VIDEO For more information about products, accessories or prices, please contact us.

Tractor Attachments The Maredo® Tractor Attachments (MTools) is a new line of head specialist attachments to fit behind a tractor for maintaining larger turf areas. ​ The Maredo® Tractor Attachments (MTools) is a new line. As Maredo calls itself “The HEAD Specialist”, we didn’t have cassettes available that fits behind a tractor for maintaining the larger turf areas. The MTools are taking care of that now. ​ MFrame 319 to Connect Heads to the Tractor ​ The MTools are heavy duty heads developed for a (compact)tractor. To connect them to the 3 point of the tractor, we need a frame. So we developed first the MFrame 319 to connect the heads to the tractor, which can hold 3 MT heads. This MFrame has a full mechanical drive line for the 3 heads and flexible connection points to connect the MT heads. ​ The overall working width of the MFrame with 3 MT heads attached is 1900 mm = 76”. The mechanical drive line consists of PTO shafts and gearboxes, which altogether is a very reliable drive line that cannot slip or leak. The MFrame fits 20-45 HP (compact)tractors, which have a 3-point CAT 1 connection and a 540 PTO. The weight of the MFrame 319 is 130 kg. Add the weight of the 3 MT heads for calculating the total weight. It is possible to make wide turns with the MFrame. The MFrame + MTools are ideal for fairways, sportfields, parks etc. MT200 Flex-Verticutter A wide verticut machine behind the tractor. MT210 VibeSpike-Aerator A spiker aerator behind the tractor.

GT210 VibeSpike-Aerator Aerator for the greens fits your triplex greensmower and turns it into a spike aerator. ​ The Maredo® GT210 VibeSpike-Aerator for the Greens fits your triplex greensmower and turns it into a spike aerator, using a special technique to drive the spikes in the soil. ​ We all know how hard it is to push a drum type spiker in the ground. You need a lot of weight and next you get damaged hole edges. Maredo has developed a new technique to overcome this problem. Maredo uses vibration to hammer a spike in the soil. The 6 spike sections are mounted around a driven camshaft. The spike sections roll over the ground and next they vibrate when the cam shaft is driven. This vibration helps to drive the spike in the soil, de-compact the soil and finally leave a nice, clean hole. Another great thing is that at the moment the spike reaches a hard spot, we only have to drive slower. We get more vibrations per spike, which hammers the spikes finally in the soil. ​ The maximum working depth is 35 mm. = 1-1/2” and can be adjusted over the front roller. The GT210 creates about 700 holes per square meter. The spike thickness is 3 mm. = 0.120”. It can be used at mowing speed and you can play right away. It is a quick way to open up the top layer of your greens and tees. Several customers use them every 2-3 weeks, just before mowing the greens. GALLERY WATCH VIDEO For more information about products, accessories or prices, please contact us.

GT214 VibeDisc-Slicer These heads turn your greensmower into a slicer, that cuts your turf in a clean way. The Maredo® GT214 VibeDisc-Slicer for Cutting the Turf fits your triplex greensmower and turns it into a slicer, that cuts your turf, roots and grass runners in a clean way. ​ There are many slicers on the market now-a-days. The majority uses weight to cut through the tough (thatch) layer. But we all know how hard that is. And the reason is easy. No cutting movement, only pushing and rolling. It is like a sharp knife that we push through the bread, instead of moving the knife forward- backward. Pushing damages the bread and doesn’t leave a nice cut behind. That is exactly the same what happens when we use a standard rolling slicer disk on a thatch layer. The Maredo GT214 VibeDisc-Slicer for Cutting the Turf uses vibration to create a forward- backward cutting action on the slicer blade. Due to this action, the slicer blade cuts a perfect slit, without the top turf layer being pushed down (leaving an uneven surface). ​ The maximum working depth is 35 mm = 1-1/2” and this can be adjusted over the front roller. The slit distance is 42 mm =1.65”. The slicer blade thickness is 0.8 mm = 0.030” and they are made from hardened stainless springsteel. Because the blades can easily be damaged while stored on a concrete floor, we deliver trolleys as well. These trolleys make life so easy. Basically you never have to pick up the heads by hand. They are either on the machine or on the trolley. GALLERY WATCH VIDEO For more information about products, accessories or prices, please contact us.

GT410 VibeSpike-Seeder These heads turn the greensmower into an overseeder for your greens and tees. The Maredo GT410 VibeSpike-Seeder for bent fits your triplex greensmower and turns it into an overseeder for your greens and tees. ​ The GT410 has a spiker shaft that creates the holes. The spike sections roll over the turf and next they vibrate due to the driven central cam shaft. The grass seeds are fed from the front by the seed box, which is driven by the front roller. The dosing is set via exchangeable gearwheels and start from 2 gram per square meter. When the seed drops down, it is funneled exactly in front of the spikes. The rolling spikes pick up the seed and plant the seed in the hole they are punching. The rear brush takes care of the seed falling in between the holes and the rear roller finishes the surface. ​ The GT410 VibeSpike-Seeder for bent works at mowing speed. It just leaves 1100 tiny clean holes per square meter. You don’t need to do anything afterwards. You can play right after it. And since the overseeding of 18 regular greens takes only 4-5 hours, you can plan the overseeding in between the players. As this is an easy job, current users overseed every 4-5 weeks during the growing season, preparing a seedbed in the soil. GALLERY WATCH VIDEO For more information about products, accessories or prices, please contact us.

GT250 CountRo-Sweeper The heads turn your greensmower into an effective collecting brush. ​ The Maredo GT250 CountRo-Sweeper fits your triplex greensmower and turns it into a very effective collecting brush or a brush that brushes the topdress into the turf and aeration holes. ​ There are more brushes on the market now-a-days, that fits a triplex greensmower. They run at high speed forward. The Maredo GT250 CountRo-Sweeper is the only one that counter rotates at a lower speed. This is achieved by using a very special gearbox, that turned our greensmower sweeper into the most effective collecting brush. And being so effective means that it easily picks up all kinds of items like tree needle, leaves, redundant topdress, cores, worm piles etc. etc. It is also used to brush off the dew of the green. The other nice application is brushing in the topdress sand. Again, because the brush counter rotates, the topdress is pick up very effectively, smashed against a deflector plate which guides the topdress straight into turf and aeration holes. Some customers are using the heads to brush up dense turf and because the brush counter rotates, they state that the GT250 works very effectively in thinning their turf. ​ It comes standard with its own stainless steel collecting box (as the triplex ones does not match) and a topdress deflector plate. GALLERY WATCH VIDEO For more information about products, accessories or prices, please contact us.

GT300 VibeShoe-Roller Your triplex greensmower is turned into a new type “roller” that smoothens your green. The Maredo® GT300 VibeShoe-Roller for Increasing Green Speed fits your triplex greensmower and turns it into a new type “roller” that smoothens your green. ​ Green speed is an important issue. Not always a high stimp value is required, more often a consistent stimp on all greens is what is asked for. Rolling is seen as the best answer for increasing you stimp value and consistency, however some question if that is true as a roller has a tendency to push things forward. Just think about a puddle. If you go through a puddle, all water is pushed forward. The same will happen with the edge of a ball mark. It is all pushed in one direction. ​ The Maredo GT300 VibeShoe-Roller for Increasing Green Speed pushes vertically down with its shoes. We can set how much we want to push (as we know that we create more compaction at the moment we smoothen our surface by e.g. rolling). ​ The GT300 uses 6 rounded shoes that “walk” over the green. By pushing down on the turf, they smoothen the whole surface, increasing the consistency and the stimp value. At maximum machine settings, an increase of 25- 30% of the stimp value is possible in one pass. ​​ Another application is “brushing or pushing in” the topdress. Just set the height so that the vibrating plates so that they just touch the topdress. Doing it like this will safe the turf from getting stressed, while the topdress finds its way through the turf. GALLERY WATCH VIDEO For more information about products, accessories or prices, please contact us.