ACCESsORIES
For performing front work with increased reliability, ease and efficiency.
Adding Zuidberg smart accessories and attachments to your front linkage and front PTO improves reliability, ease and efficiency of your work. You can do this by adding an ECO-Twin PTO, an accumulator and a pressure gauge, easy float or front controls. View the options below.
Eco-Twin PTO
The ECO-TWIN PTO was designed based on the knowledge that current tractors can supply the same power even at a lower rpm. That is why this front PTO has the option to switch between ‘normal transmission’ and ‘eco-transmission’ from the cabin, allowing the engine speed to be reduced to approximately 1600 rpm.
With the ECO-TWIN front PTO, you now have a choice between two speeds for the PTO:
-
1000E rpm saves up to 20% in fuel
-
1000 rpm provides maximum engine power
Benefits
-
Fuel savings of up to 20%
-
Choice between 1000 and 1000E rpm
-
Reduced noise levels
Independent research has shown that the switchable ECO-Twin PTO saves up to 20% in fuel.*
(*) The test results have been taken from research carried out by PPP-Agro Advies in collaboration with Wageningen UR Livestock Research (University & Research centre). The study showed that with the ECO-TWIN PTO, a minimum of 10%, up to a possible 20%, of fuel can be saved when compared to a front PTO with a ‘normal’ transmission of 1000 rpm
Accumulator
The Accumulator is available as an expansion to Zuidberg front linkages and offers additional protection to the tractor, equipment and front linkage. The Accumulator absorbs peak loads, resulting in increased comfort levels and a prolonged service life of the tractor and equipment. In addition, the newly designed throttle prevents the tractor’s jumpy behaviour during transport.
-
Smart features of the Accumulator
-
Protects the tractor, equipment and front linkage against large peak loads
-
Prevents jumpy road behaviour
-
Optimum driving comfort
-
Equipment loading and unloading possible
Weight Carrier
The three-point weight carrier is specially developed for mounting the basic weight of the tractor, which is removed when mounting the front linkage. The weight carrier is tractor-specific and, depending on the tractor type, the weight to be added to the weight carrier varies between 700 and 1600 kg.
Smart features of the Weight Carrier
-
Tractor-specific design
-
Weight to be added from 700 to 1600 kg
-
Three-point absorption for the tractor’s basic weight
Front Remote Control
The front control system has been developed to operate the front linkage from outside the cabin, e.g. while hooking up and disconnecting equipment. These front control systems have a tractor-specific design and come with a variety of features. Ask your dealer about the possibilities for your tractor.
Front control systems in various versions and sizes:
-
For controlling the front linkage outside the cabin
-
For controlling the front linkage outside the cabin with a height limiter
-
For controlling the front linkage outside the cabin with adjustable lifting and lowering speeds
-
For controlling additional hydraulic functions outside the cabin
Position Limiter Kit (P. L. K.)
The position limiter set is available as an expansion to Zuidberg front linkages and offers an adjustable height or depth limiter, depending on the mounting method of the valve on the multi-valve. Use of the position limiter set results in increased ease of working and eliminates the adverse impact of unacceptably high or low positions of the front linkage.
Smart features of the position limiter set:
-
Can be mounted as a height limiter or depth limiter, depending on the mounting method of the valve on the multi-valve
-
The valve can be mounted directly onto the multi-valve already present
-
Position limit can be set on lifting frame
-
Can be used on all Zuidberg front linkage systems that have a cast-iron lifting frame
-
System can be activated using a switch mounted in the cabin
Chain Hangers
The chain hook set is available as an expansion to Zuidberg front linkages and holds chains or springs that are used to reduce the load on front equipment. The chain hooks offer various options for attaching the chains or springs and are mounted at the right height and width to optimise the load reduction on the equipment.
The chain hook set may include the following smart features:
-
Design matching the tractor, bonnet or front linkage
-
Easy access of lubrication points is maintained
-
Uninterrupted beams of the headlights are retained
-
Extra high chain hooks for tractors that are frequently used on hilly terrain
Front Double Acting Services Lines
The front hydraulic system is available as an expansion to Zuidberg front linkages and offers the possibility to hydraulically operate equipment. A Zuidberg front linkage is often pre-designed for mounting one or more front hydraulics sets for optimum integration in the top plate.
Customised front hydraulics:
-
Hydraulic hoses at the correct length
-
Banjo eye and nipple connection for easy mounting
-
Quick release with dust cover
-
Supplied ready for use
Some tractors can also be equipped with a front control system, with the option to control the front hydraulics outside the cabin. It is therefore important to always ask your dealer about the possibilities for your tractor.
Lowering Speed Control System
The Lowering Speed Control Set is available as an expansion to Zuidberg front linkages and offers the possibility to adjust the lowering speed of the front linkage as desired. The set has been designed to be connected directly to the multi-valve, but can also be used with a 12 mm pipe connection. If the multi-valve is in the single operating position, the oil flow can be adjusted as desired using the blue button, also changing the lowering speed of the front linkage.
Lowering Speed Control Set, the power of simplicity:
-
Easy to mount and use
-
Mounting possible on every Zuidberg front linkage, also on models already supplied.
-
Can also be mounted to a standard 12 mm pipe if there is no room at the multi-valve (hydraulic couplings are not supplied)
